Drilling
Our Drilling Equipment Used in the Collection of Two-Dimensional (2D) and Three-Dimensional (3D) Seismic Data for Mining, Geothermal, Oil, and Natural Gas Energy Projects in Land Areas:
- Hand Drill
- Rock Drill(Mini Rock & Big Rock)
- Track Drill
In field drilling operations, to increase daily drilling production in flat areas that do not require Hand Drill operations and to conduct work in cultivated and garden areas (such as olive groves, pistachio orchards, etc.) without causing environmental damage, we have commissioned two (2) Mini Rock Drills and three (3) Tractor Drills. These machines have been integrated into our field operations. Thus, in addition to 21 sets of Hand Drills, the drilling equipment inventory has been strengthened with the addition of 2 tracked Mini Rock Drills and 3 Tractor Drills.
Hand Drill
For the first time in Turkey, the Hand Drill we developed and manufactured is being used actively and efficiently in mountainous and narrow areas where mobile vehicles cannot access.
- Operates with 8-12 Bar Air Pressure, connected to a Mobile Compressor.
- Equipped with at least a 6-6.5 HP Gasoline Engine.
- Features an automatic transmission.
- An Aluminum-bodied Reducer with a speed controller is present between the engine and the rod system.
- It has a monoblock drilling system.
- Capable of drilling up to 76 mm in diameter and 25 meters in depth.
- Includes a system for both cooling and rotating the drill bit attached to the rod.
- When disassembled, each part can be easily carried by a single person.
- Air control attachments and air valves are present at the connection points of the air hoses.
- A safety system is in place to stop rotation when the gas pedal is released, preventing injury to operators if the tool gets stuck.
Rock Drill
GEOROB PS26 Drilling Machine Technical Specifications
| Specifications | PS26 (Tracked) |
|---|---|
| Length | 2310 mm |
| Width | 900 mm |
| Number of Legs | 4 |
| Rated Power | 36 HP dizel |
| Noise Level | 80 dB |
| Number of Cylinders | 4 |
| Tower Height - Rod Length | 2.70 m - 1.50 m |
| Push Force | 5500 Kg |
| Pull Force | 3500 Kg |
| Automatic SPT | Optional |
| Double Jaw | Optional |
| Maximum Jaw Width (Maximum Pipe Diameter) | 180 mm |
| Hydraulic Pump | 2 units |
| Hydraulic Oil Capacity | 70 liters |
| Fuel Capacity | 36 liters |
| Winch | Optional |
| Maximum Torque | 834 Nm |
| Speed | 100-250 rpm |
| Weight with Minimal Setup | 1500 Kg |
| Water Pump (Drilling Pump) Flow Rate (Liters/Minute) | 28 |
| Water Pump (Drilling Pump) Pressure (Bar) | 30 |
| Maximum Drilling Diameter (mm) | 150 |
| Remote Control Walking Unit | Optional |
Track Drill
Tractor-Mounted and Tractor-Driven Tower Drilling
- Stroke Length: 2.25 m, Working Area: 1.5 m.
- Can operate with both water and air.
- Speed range adjustable (operates between 80 and 600 rpm)
- Pressure (flow rate) adjustable.
- Includes a hydraulic vise for holding the lower tool (Lower Jaw)
- Equipped with a lower dust collection chamber.
- Features adjustable angle settings for slope drilling.
- Includes side baskets for working with rods.
- Oil pump and oil tank should be cooled.
- Oil pump is of European origin.
- Morset pump is of European origin.
- Includes a hydraulic oil filter.
